TRS - MIDI CABLE
SKU:
$30.00
$30.00 - $32.00
per item
Shipped cable is the right angle to right angle as shown in pictures.
We've teamed up with SINASOID to bring you one of the first and most pedalboard friendly 1/4" TRS to 5-pin MIDI DIN cables available anywhere.
We currently stock 3 different cable lengths to satisfy most general needs.
In addition to being right angle, the 5-pin MIDI connector can also be rotated to whatever position you need to best match the orientation of the equipment being plugged into. Just loosen the set screw in the MIDI plug jacket, carefully rotate the connector to the orientation needed, then re-tighten the set screw.
NOTE: If you need a custom length cable that we don't cary here, please contact SINASOID directly and they can hook you up!
NOTE: These cables are wired according to the recently released TRS to DIN standard from the MIDI Association. These could potentially be used with other products that use 1/4" TRS for MIDI. Please consult those product manuals for wiring / protocol compatibility.
These cables are wired as follows:
5-Pin MIDI < - > 1/4" TRS
2 < - > Sleeve
4 < - > Ring
5 < - > Tip
PS: The MJ-5P cable from Disaster Area will also work. Same thing as here but without the right angle MIDI plug.
We've teamed up with SINASOID to bring you one of the first and most pedalboard friendly 1/4" TRS to 5-pin MIDI DIN cables available anywhere.
We currently stock 3 different cable lengths to satisfy most general needs.
In addition to being right angle, the 5-pin MIDI connector can also be rotated to whatever position you need to best match the orientation of the equipment being plugged into. Just loosen the set screw in the MIDI plug jacket, carefully rotate the connector to the orientation needed, then re-tighten the set screw.
NOTE: If you need a custom length cable that we don't cary here, please contact SINASOID directly and they can hook you up!
NOTE: These cables are wired according to the recently released TRS to DIN standard from the MIDI Association. These could potentially be used with other products that use 1/4" TRS for MIDI. Please consult those product manuals for wiring / protocol compatibility.
These cables are wired as follows:
5-Pin MIDI < - > 1/4" TRS
2 < - > Sleeve
4 < - > Ring
5 < - > Tip
PS: The MJ-5P cable from Disaster Area will also work. Same thing as here but without the right angle MIDI plug.